Bearing steels are used for ball and roller bearing applications and are comprised of low carbon (0.10 to 0.20% C) case-hardened steels and high carbon (-1.0% C) through-hardened steels.
Item No :
China Supplier of Bearing SteelOrder(MOQ) :
500KGSProduct Origin :
ChinaSurface :
Black Surface or Mahined SurfaceShipping Port :
Main Port of ChinaLead Time :
7-60 DaysWeight :
Depends on the details quantitySize :
Dia20-500mm, Thickness: 20-400mmGrade :
52100/100Cr6/SUJ2Bearing steel round bar is a type of steel specially designed for use in bearing applications. It is made from high-quality chromium, molybdenum, and vanadium alloy steels, which have excellent properties of strength, toughness, and wear resistance. Bearing steel round bars are typically manufactured to very tight tolerances in order to achieve precise dimensions and improve the performance of the bearings. The surface of the bars can be polished, ground, or turned, depending on the required finish and the specific application. Some common applications of bearing steel round bars include use in manufacturing of bearings, rollers, and other similar components.
Product Specification
|
Grade |
Round bar |
Flat bar |
Plate |
Block |
Forging parts |
||||
|
AISI/SAE |
DIN |
W.Nr |
JIS |
BS |
|||||
|
51100 |
105Cr4 |
1.3503 |
SUJ1 |
√ |
√ |
√ |
|||
|
52100 |
100Cr6 |
1.3505 |
SUJ2 |
√ |
√ |
√ |
|||
|
Round bar:D10-610mm Hot Forged Flat bar:T10~90mm X Width 60~550mm Plate:T10-300mm X Width 1000-2300mm Block:T 100~800mm X Width 100~1,600mm Remarks: we can accept some special size that beyond our available size. |
|||||||||
Product Image
Pre-hardened plastic mould steels are widely used for manufacturing mould for plastic because of their four main properties and characteristics:Wear Resistance Corrosion, Resistance Mirror, Finish ability,Surface Work ability. These steels are quenched and tempered before being manufactured into mould for plastic, therefore the deformation and cracking of mould resulted from heat treatment can be avoided.
read More
Hot working tool steels are used in the hot-forming of work-pieces made of iron and non-ferrous metals as well as alloy derivatives at high temperatures. They are utilised in processes such as pressure die casting, continuous casting, extrusion and drop forging as well as in tube and glass manufacturing.
read More
Cold working tool steels are high carbon steels that contain alloy additions of tungsten, manganese, chromium and molybdenum, which increase the hardenability of the steels. The high carbon content produces adequate wear resistance for short run applications. Cold work tool steels are used for cutting and pressing tools, for dies and knives, for stamping and drawing tools, hobs, thread rolling tools and in many other applications due to their typical properties – high hardness, good toughness and compressive strength and high wear resistance.
read More
Bearing steels are used for ball and roller bearing applications and are comprised of low carbon (0.10 to 0.20% C) case-hardened steels and high carbon (-1.0% C) through-hardened steels.
read More
Spring steel is used for highly stressed, quenched and tempered springs, hand tools, larger diameter coiled springsand rock drilling studs in vehicle and tractor industries
read More
IPv6 network supported
New Products
